Versatop Professional Pipe & Drape System

Made in the USA

Our unique patented design offers safe and secure connections using our 2.0® socket. Ideal for pipe and drape, back drops, booth dividers, crowd management, signage, lighting and more. The best solution to quickly add salon stall dividers or  panels between restaurant tables and booths to help prevent the spread of COVID-19. Build your own system or buy a kit today from one of our Authorized Dealers.

Uprights with Glide-Lock™

Telescoping Uprights with Glide-Lock™

  • Easy to raise and lower to desired height with Glide-Lock™
  • Two-piece telescoping poles for height ranges from 3 feet to 16 feet
  • Three-piece telescoping poles for height ranges from 7 feet to 23 feet
  • Available in anodized gray or black
  • Build your own kits with uprights, drape support rods, and bases
  • Professional grade – Made in the U.S.A.

Fixed Uprights

Fixed Uprights

  • Fixed heights 3′ or 8′ available
  • Economic value

Based Plates

Base Plates

  • Military grade black powder coated
  • Handle included
  • Three pin holes

*Pins sold separately (see below)

Pins for Base Plates

Pins for Base Plates

Choose your pin size based on your specific needs and on the following guide:

  • 6″ tall pin for up to 8′ tall uprights
  • 8″ tall pin for up to 14′ tall uprights
  • 12″ pin for up to 23′ tall uprights

2.0® Telescoping Drape Rods

Horizontal Supports (CrossBars)

2.0® Telescoping Drape Rods

  • Telescoping lengths from 3′ to 16′
  • Available in Gray or Black
  • Professional grade – Made in the U.S.A.

The Sidearm™

The Sidearm™

The Versatop Sidearm™ is the best solution to safely and easily install multiple drape lines to a single upright. Molded as a structurally reinforced body with an extended Crown™ (approximately three inches from the connection point), it allows simple and secure installation of an additional drape line or valance to your next set.

The Sidearm™ also gives users the ability to attach lightweight accessories directly to the body. By using one of the “flange nut” rails on either side, users have a wide variety of attachment options. In addition, there are two 1/4” threaded inserts accessible from the top.

The Shoulder Block™

The Shoulder Block™

The Versatop Shoulder Block™ is the perfect solution for securing lightweight accessories to your Versatop 2.0® upright poles. Add a wide variety of elements to drape lines, from curtain swags to exit signs, you can secure just about any lightweight accessory with the Versatop Shoulder Block™.

Utilizing one of the three 1/4” “flange nut”
rails on the body, you have the ability to adapt to any need. Add eyelets, hooks, carabiner clips, exit signs, *lightweight LED fixtures, and more.

In addition, there is a single 1/4” threaded insert accessible from the top for added functionality and security.

The Angle Mounted Crown™

Angle Mounted Crown™

The Versatop Angle Mounted Crown™ has proven to be one of the most versatile tools in the 2.0® product line.

Attach the Angle Mounted Crown™ to a clamshell clamp or cheeseborough* for a variety of connection options. Use the Angle Mounted Crown™ to wrap truss with drape while still allowing clamp access to the truss structure. Secure the Angle Mounted Crown™ to a wall in a permanent installation to create doorways or draped off areas without the need for uprights or bases.

*Clamp Not Included

Mounting Post™

Mounting Post™

Another great solution for securing lightweight accessories to uprights outfitted with the Pipe & Drape 2.0® system. The Steel Mounting Post™ allows users to add a wide variety of elements to drape lines.

Utilizing 1/4” x 20 threaded insert that is located in the center of most Crowns™, the Steel Mounting Post™ secures firmly to the top of your Upright. This allows users to secure a variety of accessories to the tops of uprights using the 7/16” x 14 threaded post; from exit signs, *lightweight LED fixtures and more. The Steel Mounting Post™ is built to be a versatile addition to your Pipe & Drape 2.0® solution.

*Made from steel for years of use in the field (10 LB Maximum Weight Limit).

Threaded Ball Stud™

Threaded Ball Stud™

One of the most useful accessories in the Versatop 2.0® lineup, Threaded Ball Studs allow users to connect a variety of elements to the 2.0® system.

For example, attach Threaded Ball Studs to standard *frame screens that use 5/16” x 18 (or M8) coarse threaded inserts, and simply hang the screen from the drape line.

*Weight limit of 20lbs per Ball Stud when properly installed and used with properly installed Versatop 2.0® Crown.

Anti-Roll Clip™

Anti-Roll Clip™

A simple solution to overcome the pull towards the center of gravity when using tie-on drape or backdrops with Versatop 2.0® drape support rods.

The Versatop Anti-Roll Clip™ is the perfect solution when using grommet drapes that require bongo ties, or tie line. Once clipped, the “beak” prevents the crossbar rolling action due to gravity, while still allowing for the flexible angle movement that the Pipe & Base 2.0® system is known for. The Anti-Roll Clip™ fits any crossbar that has been outfitted with the Versatop Ball Caps™.

Recommended use is two (2) clips per cross-bar section. Rated to support a maximum torque rating of 15 inch-pounds each, the Anti-Roll Clip™ will easily support standard velour or poly drapery.

Socket Clip™

Socket Clip™

The Socket Clip™ is a simple solution for integrating old slotted uprights with your upgraded Pipe & Drape 2.0® system. If you cross rent from companies that have not upgraded to Pipe & Drape 2.0®, or if your company rents to other firms, the Socket Clip™ is a “must-have” accessory.

The Socket Clip™ fits any upright that has standard slots, allowing cross supports (sliders) fitted with Pipe & Drape 2.0® Ball Caps™ to connect to the slotted area of the upright.

Made from a specially formulated fiber infused Nylon compound, the Socket Clip™ is lightweight and very strong. Rated to support a maximum load of 20 pounds each, the Socket Clip™ will easily support standard velour or poly drapery.

Purchase from an authorized dealer near you

click on a dealer below to shop today

U.S.A.

Georgia Stage

Europe and UK

Want to Rent Instead?

Ready to Pipe & Drape the Smart Way?

Find a Dealer

Become a Dealer

3245 East Patrick Lane, Suite G
Las Vegas, NV 89120

Quick Links

Home

Discover

Products

Client Gallery

Client Testimonials

News

Contact Us

Stay Updated

(702) 982-3311

Privacy Policy

Terms of Use

© 2020 Versatop™ Support Systems, LLC. ALL RIGHTS RESERVED.

Website Design By Digital DressUp

Uprights
with Glide-Lock™
Inversion Series
with Glide-Lock™
Fixed
Uprights
Horizontal Supports
(CrossBars)

Fixed Sizes

· 12” (30.48cm)

· 18” (45.72cm)

· 24” (60.96cm)

Telescoping Sizes

· 2’ – 3’ (0.6m – 0.9m)

· 3’ – 5’ (0.9m – 1.5m)

· 4’ – 7’ (1.2m – 2.0m)

· 5’ – 8’ (1.5m – 2.4m)

· 6’ – 10’ (1.8m – 3.0m)

· 7’ – 12’ (2.0m – 3.6m)

· 8’ – 14’ (2.4m – 4.2m)

· 9’ – 16’ (2.75m – 4.9m)

2 Piece Telescoping Sizes

· 3’ – 5’ (0.9m – 1.5m)

· 4’ – 7’ (1.2m – 2.0m)

· 5’ – 8’ (1.5m – 2.4m)

· 6’ – 10’ (1.8m – 3.0m)

· 7’ – 12’ (2.0m – 3.6m)

· 8’ – 14’ (2.4m – 4.2m)

· 9’ – 16’ (2.75m – 4.9m)

Color Options

· Anodized Grey
· Annodized Black
· Custom Powder Coat

3 Piece Telescoping Sizes

· 5’ – 11’ (1.5m – 3.3m)

· 6’ – 14’ (1.8m – 4.0m)

· 7’ – 17’ (2.0m – 5.0m)

· 8’ – 20’ (2.4m – 6.0m)

· 9’ – 23’ (2.7m – 7.0m)

2 Piece Telescoping Sizes

· 3’ – 5’ (0.9m – 1.5m)

· 4’ – 7’ (1.2m – 2.0m)

· 5’ – 8’ (1.5m – 2.4m)

· 6’ – 10’ (1.8m – 3.0m)

· 7’ – 12’ (2.0m – 3.6m)

· 8’ – 14’ (2.4m – 4.2m)

· 9’ – 16’ (2.75m – 4.9m)